capt_long

Planning

Monday, July 10, 2023

Time Event  
18:00 - 22:00 Welcome and Registration - Hôtel Dupanloup  

Tuesday, July 11, 2023

Time Event  
08:00 - 09:00 Registration - Registration  
09:15 - 09:45 Welcome (Amphitheater Cabannes)  
09:45 - 10:15 Strategy for energy - France 2030 (Amphitheater Cabannes) - X. Montagne (DGRI, France)  
10:15 - 10:40 Coffee break  
10:40 - 12:40 Internal Combustion Engines (Amphitheater Blaise) - W. Northrop  
10:40 - 11:00 › A Review of the State-of-the-Art for Ammonia Combustion and Emissions Characteristics for Spark-Ignition Engines - Vikas Sharma, University of Brighton - https://youtu.be/nkGYsTf1KYU  
11:00 - 11:20 › Ammonia burning in premixed and diffusive modes in marine engine-like conditions - Paolo Sementa, CNR STEMS  
11:20 - 11:40 › Ammonia combustion with biomass gaseous fuels: from fundamental properties towards engine use - Pierre Bréquigny, University of Orleans – Laboratoire PRISME  
11:40 - 12:00 › CFD EXPLORATION OF AMMONIA IGNITION AND COMBUSTION IN SI ENGINE USING PLASMA ASSISTED IGNITERS - Jacopo Zembi, University of Perugia  
12:00 - 12:20 › CFD study of combustion in ammonia SI and RCCI engine - Lorenzo Sforza, Politecnico di Milano  
12:20 - 12:40 › CONVERSION OF AN EXISTING 2.0L MULTI-CYLINDER COMPRESSION IGNITION ENGINE INTO A 100% AMMONIA FUELED SPARK IGNITION ENGINE - Virginie MOREL, AOC Paris  
10:40 - 12:40 Cracking Systems (Joule 101) - M. Isaacs  
10:40 - 11:00 › 1D virtual investigation of ammonia cracking - Vivien Guenther, LOGE  
11:00 - 11:20 › A COMPARISON BETWEEN Pd-Ag AND CARBON MOLECULAR SIEVE MEMBRANES FOR HYDROGEN SEPARATION DURING AMMONIA DECOMPOSITION IN A MEMBRANE REACTOR - Valentina Cechetto, Eindhoven University of Technology [Eindhoven]  
11:20 - 11:40 › Catalyst Design for Mild Temperature Ammonia Cracking - Alberto ROLDAN Martinez, Cardiff Catalysis Institute, School of Chemistry, Cardiff University  
11:40 - 12:00 › HPAC: Design and testing of a high pressure ammonia cracker - Richard Cowan, STFC Rutherford Appleton Laboratory  
12:00 - 12:20 › Optimisation of a Ru-catalyst for ammonia cracking - Santiago Casu, Heraeus Deutschland GmbH & Co. KG  
12:20 - 12:40 › TURBO Fuel Cell - Highly Efficient Ammonia Energy Converter - Fabian Mauss, Brandenburg University of Technology [Cottbus – Senftenberg]  
10:40 - 12:40 Reaction Kinetics (Amphitheater Cabannes) - M. De Joannon  
10:40 - 11:00 › NH3 Ignition Delay Time at Knock engine conditions - Florian HURAULT, Laboratoire PRISME  
11:00 - 11:20 › A Kinetic Modelling Study for Estimating Residual NH3 Speciation at the Combustion Outlet in 70/30 vol% NH3/H2 Flames - Ali Alnasif, Cardiff University  
11:20 - 11:40 › A NOVEL ANALYTICALLY REDUCED CHEMISTRY SCHEME FOR HIGH-FIDELITY LES OF NH3/H2/N2 COMBUSTION: PRELIMINARY APPLICATION TO A PARTIALLY PREMIXED SWIRL-STABILIZED FLAME - Héctor José Vargas Ruiz, TotalEnergies, Centre Européen de Recherche et de Formation Avancée en Calcul Scientifique  
11:40 - 12:00 › An experimental and modeling study on the laminar burning velocity of oxygen-rich NH3+O2+N2 mixtures - Jundie Chen, Lund University  
12:00 - 12:20 › Detailed study of NH2* chemiluminescence in ammonia combustion - Alka KARAN, Institut de Combustion, Aérothermique, Réactivité et Environnement  
12:20 - 12:40 › Experimental and Chemical Kinetic Studies on Ammonia Oxidation Using a Micro Flow Reactor with a Controlled Temperature Profile - Kenta Tamaoki, Institute of Fluid Science, Tohoku University  
12:40 - 13:40 Lunch  
13:40 - 14:30 Processes of ammonia synthesis (Amphitheater Cabannes) - N. Mézailles (CNRS-Université de Toulouse, France)  
14:30 - 16:10 Internal Combustion Engines (Amphitheater Blaise) - D. Emberson  
14:30 - 14:50 › Direct injection ammonia spray characterization under non-reacting diesel-like conditions - Gabriela Bracho, Universitat Politecnica de Valencia  
14:50 - 15:10 › Dual fuel combustion of ammonia and diesel in a CI engine by direct injection - Karl Oskar Pires Bjørgen, Norwegian University of Science and Technology [Trondheim]  
15:10 - 15:30 › Experimental and CFD investigation of ammonia-biodiesel dual direct injection engine - Ebrahim Nadimi, Silesian University of Technology  
15:30 - 15:50 › Experimental study of emulsified diesel ammonia solution (EDAS) as high reactivity fuel in compression ignition of gasoline in RCCI mode - Ganesh Duraisamy, Internal Combustion Engineering Division, Anna University  
15:50 - 16:10 › Hybrid SOFC-ICE power system operating with ammonia - Giovanni Cinti, Università degli Studi di Perugia  
14:30 - 16:10 Production (Joule 101) - B. David  
14:30 - 14:50 › 2nd Power to Ammonia, Ammonia to Power - Cheng Liang, Proton Ventures B.V.  
14:50 - 15:10 › A comprehensive Python-based CFD model of an ammonia synthesis reactor - Antonio Alcaide Moreno, CIRCE – Technology Center  
15:10 - 15:30 › Agile “green ammonia” production from distributed and intermittent renewable energy through process integration. - Collin Smith, Department of Chemical Engineering and Biotechnology, University of Cambridge, Philippa Fawcett Drive, CB3 0AS  
15:30 - 15:50 › Ammonia synthesis in catalytic membrane reactors: Influence of the support in Ru-based nanocatalysts prepared via polyol reduction method - Gaetano Anello, Eindhoven University of Technology  
15:50 - 16:10 › ASPIRE Ammonia Synthesis Plant using Intermittent Renewable Energy - Tristan Davenne, Energy Research Unit, Science & Technology Facilities Council  
14:30 - 16:10 Laminar Flames (Amphitheater Cabannes) - A. Hayakawa  
14:30 - 14:50 › Intrinsic instabilities of hydrogen and hydrogen/ammonia premixed flames: influence of equivalence ratio, fuel composition and pressure. - Jessica Gaucherand, Department of Energy and Process Engineering [Trondheim], CERFACS  
14:50 - 15:10 › Intrinsic Flame Instabilities in Ammonia/Hydrogen Flames: Analysis of Temperature and Progress Variable - Terence Lehmann, Institute for Combustion Technology, RWTH Aachen University  
15:10 - 15:30 › Measurements of NH3 and NH2* profiles in ammonia counterflow diffusion flames - Xingchang Xu, The University of Tokyo  
15:30 - 15:50 › Partially Dissociated Ammonia as a Fuel: Experimental Study on Laminar Flame Characteristics of Premixed NH3/H2/N2/Air Mixtures - Marc Klawitter, Institute of Thermodynamics and Sustainable Propulsion Systems, Graz University of Technology  
15:50 - 16:10 › Quantitative 1D Raman/Rayleigh measurements of premixed NH3/H2/N2 counterflow flames - Robin Schultheis, Technical University of Darmstadt, Department of Mechanical Engineering, Reactive Flows and Diagnostics  
14:30 - 16:10 Economical & Environmental Aspects (Joule 102) - M. Jano-Ito  
14:30 - 14:50 › Ammonia as alternative fuel for engines - Mateusz Proniewicz, Department of Thermal Engineering, Silesian University of Technology  
14:50 - 15:10 › Economic Evaluation of a Novel Small-Scale P2A Concept - Pascal Koschwitz, Technical University of Darmstadt, Insitute for Energy Systems and Technology  
15:10 - 15:30 › Environmental and economic analysis of utilizing ammonia in internal combustion engine based on a case study of a mini-tractor - Proniewicz Mateusz, Silesian University of Technology  
15:30 - 15:50 › Environmental life cycle analysis of an ammonia-ethanol fuelled ICE for power generation - Andrea Boero, Escuela Superior Politécnica del Litoral [Guayaquil]  
15:50 - 16:10 › Flexible Power-to-Ammonia Based on SOECs - Vito Verde, ENGIE, Eindhoven University of Technology [Eindhoven]  
16:10 - 16:40 Coffee break  
16:40 - 18:00 Internal Combustion Engines (Amphitheater Blaise) - Y. Jung  
16:40 - 17:00 › Large eddy simulations of diesel-ignited ammonia dual-fuel combustion - Thomas Indlekofer, Department of Thermal Energy, SINTEF Energy  
17:00 - 17:20 › Numerical study of combustion in a compression ignition engine with direct ammonia and biodiesel injection for agriculture applications - Michał Pasternak, LOGE Polska Sp. z o.o.  
17:20 - 17:40 › Optical Investigation of Ammonia Combustion Concepts: Pilot Fuel vs. NH3- or H2-Filled Pre-chamber - Silas Wüthrich, ITFE, University of Applied Sciences and Arts Northwestern Switzerland  
17:40 - 18:00 › Physical and chemical aspects of direct injection of liquid ammonia on performance of CI engine - Michal Lewandowski, Norwegian University of Science and Technology, Department of Energy and Process Engineering  
16:40 - 18:00 Production (Joule 101) - G. Cinti  
16:40 - 17:00 › Calcium Chloride-Bromides: Tuneable Ammonia Sorption Properties via Compositional Variation - Jonathan Betteridge, University of Oxford  
17:00 - 17:20 › Climbing the Ammonia Mountain: Finding the Sabatier optimum for Ammonia Synthesis with Ru Nanoparticles - Andreas Weilhard, University of Nottingham  
17:20 - 17:40 › Electroreduction of nitrogen compounds to ammonia, using Cu2O catalysts stabilized with conducting polymers. - Mauricio Isaacs, Pontificia Universidad Catolica de Chile  
17:40 - 18:00 › Investigation of Ruddlesden-Popper Oxide La0.5Sr1.5Ni0.9Cu0.1O4-δ as a Bifunctional Catalyst for Ammonia Electrolyser - Peimiao Zou, School of Engineering, University of Warwick, Coventry CV4 7AL, UK.  
16:40 - 18:00 Reaction Kinetics (Amphitheater Cabannes) - A. Konnov  
16:40 - 17:00 › 0D Simulation of NH3 Combustion Based on Reaction Kinetics - Sebastian Crönert, Institute for Automotive Engineering Stuttgart, University of Stuttgart  
17:00 - 17:20 › Numerical analysis of the ignition of H2-NH3-air mixtures - Ghazaleh Esmaeelzade, Physikalisch-Technische Bundesanstalt [Braunschweig]  
17:20 - 17:40 › Natural Gas/NH3/Air and Natural Gas/H2/Air Combustion: Shock Tube Ignition Delay Times at Gas Turbine Conditions - Subith Vasu, University of Central Florida  
17:40 - 18:00 › Prediction of NOx emissions at Industrial-scale Reformers - Emre Cenker, Saudi Aramco  
16:40 - 18:00 Economical & Environmental Aspects (Joule 102) - A. Saker  
16:40 - 17:00 › Green ammonia and the ‘pacing problem': the socio-technical relationship between governance and innovation. - Laura Norris, School of Geography and Planning, Cardiff University  
17:00 - 17:20 › Leveraging Green Ammonia for Resilient and Cost Competitive Islanded Electricity Generation from Hybrid Solar PV-Wind Farms: A study case in South Africa - Victor Sagel, University of Twente  
17:20 - 17:40 › Techno-economics of ammonia as an energy carrier. Exporting wind from the North Sea to Wales - Marco Aurelio Jano Ito, School of Engineering [Cardiff]  
17:40 - 18:00 › The role of ammonia in the decarbonisation of the Mexican economy. A multi-sectoral approach - Marco Aurelio Jano Ito, Cardiff University  

Wednesday, July 12, 2023

Time Event  
09:00 - 09:50 Ammonia MILD Combustion (Amphitheater Cabannes) - M. de Joannon (STEMS-CNR, Italy)  
09:50 - 10:50 Gas Turbines (Amphitheater Blaise) - A. Valera-Medina  
09:50 - 10:10 › Development of a high swirl and fuel-staging ammonia combustor for the gas turbine application - Min Jung Lee, Seoul National University of Science and Technology  
10:10 - 10:30 › Effects of Temperature and Humidification in 20%(vol.) Cracked Ammonia Swirling Flames - Syed Mashruk, Cardiff University  
10:30 - 10:50 › Emission characteristics of oxy-ammonia combustion in a 50kW coaxial jet burner for industrial furnace - Yong Fan, National Institute of Advanced Industrial Science and Technology  
09:50 - 10:50 Emissions (Joule 101) - G. Brinklow  
09:50 - 10:10 › Catalytic control of N2O emissions from engines fuelled with ammonia - Davide Ferri, Paul Scherrer Institute  
10:10 - 10:30 › EVALUATION OF MINIMUM NOx EMISSION FROM AMMONIA COMBUSTION - Renee Cole, Ben T. Zinn Combustion Laboratory, Georgia Institute of Technology, Atlanta, GA  
10:30 - 10:50 › Experimental research on emission characteristics of confined non-premixed ammonia–oxygen–nitrogen jet diffusion flames under oxygen enrichment condition - YU XIA, Institute of Fluid Science, Tohoku University  
09:50 - 10:50 Reaction Kinetics (Amphitheater Cabannes) - N. Lamoureux  
09:50 - 10:10 › An experimental and modeling study of the laminar flame speed of ammonia with enriched oxygen content - Alaa Hamadi, ICARE  
10:10 - 10:30 › A rationally small-size ammonia/n-heptane reduced mechanism for engine-relevant environments - Vladimir A. Alekseev, Lund University  
10:30 - 10:50 › Assessment of ammonia combustion mechanisms at atmospheric pressures - Amirreza Mottaghitalab, Abo Akademi University  
09:50 - 10:50 Economical & Environmental Aspects (Joule 102) - I. Desoussi  
09:50 - 10:10 › Using artificial intelligence to optimise the cost of green ammonia - Laura Torrente, University of Cambridge  
10:10 - 10:30 › Air pollution trade-offs of ammonia as a road transportation fuel - Irene Dedoussi, Technische Universiteit Delft  
10:30 - 10:50 › Green energy export from MENA to Europe via hydrogen carrier: techno-economic and environmental Practicality - Azd Zayoud, Institute of Thermodynamics and Fluid Mechanics, Université catholique de Louvain  
10:50 - 11:20 Coffee break  
11:20 - 12:40 Gas Turbines (Amphitheater Blaise) - Y. Suzuki  
11:20 - 11:40 › Influence of wall temperature and emission characteristics of NH3/CH4/Air Premixed flame in a model gas turbine combustor - Jeongje Park, Korea Institute of Energy Research, Korea University  
11:40 - 12:00 › Numerical design of a rich-lean micro-Gas Turbine combustor for ammonia fueling - Lorenzo Giuntini, University of Pisa - Università di Pisa  
12:00 - 12:20 › Simultaneous extension of stable combustion and low NO/NH3 emission windows of ammonia swirl flames by oxygen enrichment - Zundi Liu, Shanghai Jiao Tong University  
12:20 - 12:40 › Use of Ammonia blends in Gas Turbines for NOx abatement - Agustin Valera, Cardiff University  
11:20 - 12:40 Production (Joule 101) - D. MacFarlane  
11:20 - 11:40 › Optimal design of new green ammonia plants and hybrid revamp of existing grey ammonia plants - MICHELE CORBETTA, CASALE SA  
11:40 - 12:00 › Plasma catalysis: A pathway to sustainable and decentralized ammonia production - Xin Tu, University of Liverpool  
12:00 - 12:20 › Power-to-ammonia using a catalytic membrane reactor: influence of membrane properties and operating conditions on process performance - Simon RICHARD, Eindhoven University of Technology [Eindhoven], ENGIE  
12:20 - 12:40 › REACH: A Review of the Design and Testing of an Ammonia-Fuelled Solid-Oxide Fuel Cell System with Free Cracking from Waste Heat - Benjamin Peters, STFC Rutherford Appleton Laboratory  
11:20 - 12:40 Reaction Kinetics (Amphitheater Cabannes) - Y. Li  
11:20 - 11:40 › Combustion of Ammonia with Dimethyl Ether - Adrián Ruiz-Gutierrez, University of Zaragoza  
11:40 - 12:00 › Conversion of NH3/CH4/H2 mixtures at high pressure - Eva Casanova, Aragón Institute of Engineering Research [Zaragoza]  
12:00 - 12:20 › Exploring fuel molecular structure effects on ammonia combustion enhancement by co-firing C3-C5 ketones - Wei Li, Shanghai Jiao Tong University  
12:20 - 12:40 › Generating a simplified reaction model for NH3 using a genetic algorithm and its integration into boiler CFD - Kaito Hirose, Institute of Fluid Science, Tohoku University, Department of Mechanical Systems Engineering, Graduate School of Engineering, Tohoku University  
12:40 - 13:40 Lunch  
13:40 - 14:30 Challenging measurement of Atmospheric Ammonia Concentrations (Amphitheater Cabannes) - P. Chelin (LISA-Université Paris-Est Créteil, France)  
14:30 - 16:10 Spray (Amphitheater Blaise) - C. Hespel  
14:30 - 14:50 › An introduction to ammonia spray lab safety and setup - Li Shen, Department of Engineering Science, University of Oxford  
14:50 - 15:10 › CFD MODELING AND SIMULATIONS OF AMMONIA AND AMMONIA/HYDROGEN/METHANE BLENDS INJECTION PROCESSES IN A CONSTANT-VOLUME CHAMBER - Charalambos Chasos, Frederick University  
15:10 - 15:30 › CFD Modelling of Flash Boiling Sprays - Daniel Bundred, Department of Engineering Science [Oxford]  
15:30 - 15:50 › Microscopic characterization of NH3 spray dynamics - Santiago Cardona Vargas, KAUST  
15:50 - 16:10 › Numerical studies on the evaporation characteristics of liquid ammonia swirl spray - Zhang Meng, Xi’an Jiaotong University  
14:30 - 16:10 Production (Joule 101) - C. Laycock  
14:30 - 14:50 › Ru/RScSi electride catalyst for ammonia synthesis at low pressure - Charlotte Croisé, Institut de Chimie des Milieux et Matériaux de Poitiers  
14:50 - 15:10 › Simplified Process Simulation of a Novel Small-Scale Power-to-Ammonia Cycle for Implementation in Optimization Software - Pascal Koschwitz, Technical University of Darmstadt  
15:10 - 15:30 › SIMULATION AND OPTIMIZATION OF AN AMMONIA SYNTHESIS CATALYTIC MEMBRANE REACTOR - Iolanda Gargiulo, Eindhoven University of Technology  
15:30 - 15:50 › THE ROLE OF PROTON CARRIERS IN Li-MEDIATED AMMONIA ELECTROSYNTHESIS - Doug MacFarlane, Monash University  
14:30 - 16:10 Reaction Kinetics (Amphitheater Cabannes) - F. Mauss  
14:30 - 14:50 › Multi-species time history measurements and comprehensive kinetics modeling of nitrogenous combustion: Interaction of ammonia with NO and N2O - Jiabiao Zou, KAUST  
14:50 - 15:10 › Numerical Study of NH3-Hydrocarbon (Diesel) Chemistry Interaction in Marine Engines using Detailed Reaction Kinetics - Lars Seidel, LOGE Deutschland GmbH  
15:10 - 15:30 › ON AMMONIA KINETICS OF OXIDATION UNDER HIGHLY TURBULENT CONDITIONS AND IMPACT OF NITRIC OXIDE - PHILIPPE DAGAUT, CNRS-INSIS, Institut de Combustion, Aérothermique, Réactivité et Environnement  
15:30 - 15:50 › Probing the Reactivity of C1 Molecule with Ammonia Using Shock Tube Coupled with Laser Absorption Spectroscopy - Denghao Zhu, Physikalisch-Technische Bundesanstalt  
15:50 - 16:10 › Quantitative evaluation of the performances of detailed combustion mechanisms on neat NH3 and NH3/H2 combustion - András György Szanthoffer, ELTE Eötvös Loránd University  
14:30 - 16:10 Innovative Systems (Joule 102) - B. Dally  
14:30 - 14:50 › AMMONIA COMBUSTION FOR INDUSTRIAL FABRICATION OF CERAMIC TILES - Yi-Bing Cheng, Foshan Xianhu Laboratory, Wuhan University of Technology  
14:50 - 15:10 › Catalytic combustion mechanism of high concentration NH3 over CuO-CeO2 catalyst - Xiaolin Wei, Institute of Mechanics, Chinese Academy of Sciences  
15:10 - 15:30 › Experimental investigation of the ignition of ammonia/hydrogen/air mixtures by capacitive discharges - Stefan Essmann, Physikalisch-Technische Bundesanstalt  
15:30 - 15:50 › Modelling and performance analysis of a dual heat source ammonia-based heat pump system - Mo Alnajideen, Cardiff University  
15:50 - 16:10 › A PRELIMINARY ANALYSIS OF AMMONIA COMBUSTION FEVER - ISKENDER GOKALP, ICARE-CNRS, TUBITAK, Marmara Research Center  
16:10 - 16:40 Coffee break  
16:40 - 17:40 Spray (Amphitheater Blaise) - M. Battistoni  
16:40 - 17:00 › The Characteristics of Liquid Ammonia Sprays at Various Ambient Pressures - K D Kunkuma Amila Somarathne, Tohoku University  
17:00 - 17:20 › Vaporization process of liquid ammonia injection: Droplet modeling and experimental data - Ronan PELÉ, Laboratoire pluridisciplinaire de recherche en ingénierie des systèmes, mécanique et énergétique  
17:20 - 17:40 › ASSESSMENT OF BREAKUP MODELLING FOR LAGRANGIAN SIMULATION OF AMMONIA SPRAY IN FLASH BOILING CONDITION - Jacopo Zembi, University of Perugia  
16:40 - 17:40 Emissions (Joule 101) - S. Vargas  
16:40 - 17:00 › On the Difficulty of Interpreting NO-LIF Measurements in Confined Ammonia Flames - nour El Baba, Physicochimie des Processus de Combustion et de l'Atmosphère - UMR 8522  
17:00 - 17:20 › The role of ammonia in the sooting tendency of ethylene: a comprehensive modeling study - Alessandro Stagni, Politechnico di Milano  
17:20 - 17:40 › Transient near-wall emission characteristics of NH3/H2/N2 flames - Marina Kovaleva, Cardiff University  
16:40 - 18:00 Reaction Kinetics (Amphitheater Cabannes) - G. Dayma  
16:40 - 17:00 › Reaction Kinetics of NH2 Radicals with Dimethyl Ether (DME) and Diethyl Ether (DEE) and Their Implications in NH3-DME/DEE blend modeling - Fabian Mauss, Brandenburg University of Technology  
17:00 - 17:20 › Yet another NH3 oxidation kinetic model, and a way forward - Alon Grinberg Dana, Technion - Israel Institute of Technology  
17:20 - 17:40 › Understanding the mechanism of co-firing ammonia with biomass via reactive molecular dynamics simulations - Zhihao Xing, Queen Mary University of London  
17:40 - 18:00 › An experimental and kinetic modeling study of the combustion behaviour of ammonia blended with methanol and ethanol at engine relevant conditions - Ronan PELÉ, Université d'Orléans, laboratoire PRISME  
17:40 - 19:05 Innovative Systems (Amphitheater Cabannes) - Poster  
19:00 - 20:00 Bus - Transport  
20:30 - 22:30 Banquet  

Thursday, July 13, 2023

Time Event  
09:00 - 11:00 Health, Safety, and Security (Amphitheater Cabannes) - Workshop - S. Gant  
09:00 - 10:40 Internal Combustion Engines (Amphitheater Blaise) - P. Bréquigny  
09:00 - 09:20 › Pre-Chamber Turbulent Jet Ignition for an Ammonia Internal Combustion Engine - William Northrop, University of Minnesota  
09:20 - 09:40 › Virtual co-optimization of ammonia-hydrogen blends and medium-duty gas engines - Tim Frankent, Brandenburg University of Technology  
09:40 - 10:00 › Evaluation of hydrogen/ammonia substitute fuel mixtures for methane - Xinyi Chen, TU Darmstadt  
10:00 - 10:20 › Catalytic Aftertreatment Challenges for Ammonia Fuelled Internal Combustion Engines - George Brinklow, University of Birmingham  
10:20 - 10:40 › Computational Investigation of a Hydrogen/Ammonia RCCI engine powered by Hydrogen Peroxide - Gregor Paterson, Edinburgh Napier University  
09:00 - 10:40 Turbulent Flames (Joule 101) - F. Halter  
09:00 - 09:20 › Effect of H2 and NH3 addition on self-excited thermoacoustic instabilities in partially premixed CH4/air flames - Yuyang Li, Shanghai Jiao Tong University  
09:20 - 09:40 › Local Curvature and Speed of Turbulent Premixed Ammonia and Blends with Methane and Hydrogen Flames in a Spherically Expanding Configuration - Seif Zitouni, Université of Orléans - laboratoire PRISME  
09:40 - 10:00 › Optimisation of reduced order modelling of kinetics for turbulent premixed combustion of NH3/H2 mixtures by using the flamelet generated manifolds method - Xin Liu, Eindhoven University of Technology  
10:00 - 10:20 › On modelling of turbulent premixed jet flames doped with ammonia - Joanna Jójka, Poznan University of Technology  
10:20 - 10:40 › PILOT FLAME EFFECTS ON THE STRUCTURE OF TURBULENT NH3-CH4-AIR SWIRL FLAMES AT ATMOSPHERIC PRESSURE - Cristian D. Avila Jimenez, KAUST  
10:40 - 11:20 Coffee break  
11:20 - 12:20 Round Table and Open Discussion (Amphitheater Cabannes)  
12:20 - 12:40 Closure - Announcement (Amphitheater Cabannes)  
12:40 - 13:40 Lunch  
14:00 - 16:00 Lab Tour - PRISME & ICARE  
  
Online user: 2 RSS Feed | Privacy
Loading...